Metal Spray on Metals in Karaj
Metal spray coating is one of the most modernized coating systems in the world, which can be used to coat all metal materials with a precise formula and proper foundation by spraying on other metals. But how can we cover one metal on another through spraying and what is the purpose of this work, we will follow together in the following content. Stay calm with steel to spray 304 and 316 steel in metallic form in the coating of steel sheets, bars, pipes, crankshafts, bearings, magnetic coatings in the aerospace, food, oil and gas industries. and follow together from zero to hundred.
Why Cover Metal Spray Coverage?
There are many reasons to use metal spray services. Sometimes we can solve the problem of pitting and surface corrosion by replacing a part. But there are also times when there are problems such as the expensiveness of the parts, the rarity of the material of the part, and bigger problems such as moving large parts and the impossibility of disassembling them. The general applications of metallic spraying are:
Application of Metal Spray Coverage Reconstruction
Restoration of parts through metal spray coating is more and more used today than ever. Some of these applications are:
✅ metal spraying in military industries
✅ metal spraying in food industries
✅ metal spraying in agricultural industries
✅ metal spraying in oil and gas industries
process of implementing metal spray spray
Preparation of the desired piece: If the desired piece should be on a clock line, first the piece should be adjusted and its balance considered.
✅ If the surface If your work is oily, it must be completely removed. If there is paint or any other coating on your piece, you must remove it. In fact, the reflections, the work surface, and all the groundwork for the coating must be done. /p>
2. Undersize the work surface
3. Sandblasting of the work surface: Underlaying the part for spraying metal spray is one of the most important steps of the work, which only in the case of the smallest error may affect the result of hours of spraying metal. Sandblasting should be used for the base of the part. Regarding metal spray, more than 3 types of materials are used for sandblasting: alumina, granules and silica. you face the following three reactions in a way: ✅ roughness of the surface of the piece
✅ wounding the work to lock the metal
✅ more adhesion in metal spraying
Points to be followed in metal spray sandblast operation
✅ Before transferring the piece for sandblasting, except for the surface that is going to be sandblasted, cover the entire piece with a tube
✅ This protects the sensitive parts. It is sandblasted against the impact of grains.
✅ After sandblasting, do not place the piece in a wet environment. No liquids should be available even around the sandblasted work
4. Main metal spraying
At this stage, we must first observe a few points:
✅ The thickness of the initial pass spraying in microns
✅ Not exceeding the temperature of the surface of the part of 180 degrees Celsius
✅ Controlling the angle of spray gun on sheet, pipe, rebar, flange and.... based on experience
Pars Sanat performs metal spraying on all kinds of metals in Karaj for you dear ones. Contact us.